collapse

Show Posts

This section allows you to view all posts made by this member. Note that you can only see posts made in areas you currently have access to.


Messages - Bucket

Pages: [1] 2 3 ... 60
1
Tell Us About Yourself / Re: Number of wheels in a car
« on: April 06, 2020, 09:50:45 AM »
Welcome to the forum. Book wise there is one that would interest you coming from W.A. Here's a link to the PDF copy or a hard back is available for purchase.
https://www.dmp.wa.gov.au/Geological-Survey/Gemstone-of-Western-Australia-1540.aspx

2
General Discussion / Re: Lismore Gemfest 2020 Cancellation
« on: March 18, 2020, 02:36:51 PM »
Devonport Gem Show this weekend has been canceled as well.

3
Fossicking Locations / Re: New 2020 Fossicking Guide for NSW
« on: March 15, 2020, 01:19:04 PM »
Tell me about it!

4
Gemstone Faceting / Re: Facetron mast ball bearing
« on: March 15, 2020, 01:15:44 PM »
I'm currently directly in contact with Jarvi Manufacturing awaiting the official size that they use. I'll pass it on as soon as I get it.

5
Gemstone Faceting / Re: Facetron mast ball bearing
« on: March 12, 2020, 01:41:14 PM »
It's not loosing the ball I'm more concerned about, it's loosing the mast!

6
Fossicking Locations / Re: New 2020 Fossicking Guide for NSW
« on: March 11, 2020, 08:45:53 AM »
If I stub my toe on a 1 kg gold nugget that's poking out of the ground, do I chip 50 gms off it and cover the rest up until the next day?

Asking for a friend.

7
Gemstone Faceting / Re: Facetron mast ball bearing
« on: March 10, 2020, 03:30:02 PM »
Well I'll be buggered! Like roughcreations, I've been cutting for a while without one as well, looks like a trip down to the bike shop tomorrow for me!

8
Gemstone Faceting / Re: Magnetic toppers for Master laps
« on: February 20, 2020, 06:17:40 PM »
Yep, that's the same as me Lowjiber, never used anything else other than the securing nut.

9
Gemstone Faceting / Re: Magnetic toppers for Master laps
« on: February 19, 2020, 06:26:27 PM »
I actually haven't used a magnetic one, but was of the belief that the magnetic surface is already attached to the topper, if you have purchased one. This just means that you need a steel master lap as opposed to an aluminium one. I stand to be corrected on that one though.

10
Gemstone Discussions / Re: Can you name and roughly appraise these gems?
« on: February 13, 2020, 02:02:03 PM »
Know what most of them are and value range .... but seen this type of first post from a new member before ... fishing for some potential sales me thinks!?  ;)
Surely not Fullarton! Is there people like that out there? How has the move gone mate?










11
Ask a "Silly" Question / Re: Dopping Stones
« on: February 08, 2020, 06:37:26 PM »
My preference when cabbing is the red/brown but the club is now using the green, which I've found OK, just doesn't seem to stick quite as well as the red/brown.

12
Gemstone Discussions / Re: Can you name and roughly appraise these gems?
« on: February 07, 2020, 09:00:21 AM »
Welcome to the forum VP1. Positive stone identification is nigh on impossible through photos only, there are many things to take into consideration such as location or area found. To define what a stone is there are also tests such as refractive index, specific gravity and hardness. These can be carried out by amateurs but they take time and need to test the actual stone, also not all amateurs have the equipment to carry out such tests. Positive ID is needed before anyone can put a figure on how much they could be marketed for. They would be worth more cut and polished, but most of these appear to be stones that would need to be faceted to show them to their best, a time consuming and potentially costly exercise if you're paying someone else to do this. I doubt if you could sell them for enough to make your costs back. Having said all that, I agree with Rusted and his visual guesses. Keep in mind that the clear ones could also be clear quartz, the pink ones could be morganite and the blue/green crystals could be tourmaline or beryl. Bottom line, they need to be seen and more questions asked before definitive ID can be made.

13
Ask a "Silly" Question / Re: Dopping Stones
« on: February 06, 2020, 08:55:49 AM »
Now that you've mentioned cabbing, Tinker, I had some sealing wax left over from my working days and tried it on wooden dops at the club, it behaved completely different to the wax the club has (currently green, was then a reddish/brown). Again it was brittle and didn't hold the stone particularly well. The best way to describe it is that the cabbing wax seemed to have more 'stick' and while the cabbing wax sets firmly, it also seems to have a little flexibility and doesn't crack as easily, not as brittle.

14
Tell Us About Yourself / Re: Hello from Las Vegas USA
« on: February 02, 2020, 03:55:25 PM »
Glad to see another facetor here now Lowjiber. Do you have a favourite stone for faceting?

15
Ask a "Silly" Question / Re: Dopping Stones
« on: January 29, 2020, 10:15:57 AM »
I've tried using sealing wax before tinker, not for faceting but cabbing. Not good. When it cools and solidifies it is quite brittle and will break off either the stone or dop quite easily. It also has a lower melting point so even if you could keep the stone on the dop, it may melt a little and allow movement in the stone. I've only used wax once or twice, I'm a lot happier with two part epoxy, it holds well and doesn't move. To remove the stone I wrap the stone in a damp cloth and heat the brass dop until it drops off. Using my fingernail I then remove any epoxy still on the stone while it's warm. The bulk of the epoxy seems to remain on the dop and is easily cleaned off while the dop is warm. I haven't used Araldite, just the JB Kwik stuff that Leah and Andrew stock. I've still got some of the old Tite-on as well. Hope this helps.

Pages: [1] 2 3 ... 60

* Sponsor

HTML Online Editor Sample

ALF is hosted by Aussie Sapphire as a free service to the Lapidary community.

Visit our website here
Phone 1800 50 21 40
Or find us on Facebook

Recent Activities

Number of wheels in a car by Dembones
[April 07, 2020, 06:56:56 PM]


Resurfacing polishing laps by Giel
[April 07, 2020, 04:39:37 PM]


Stargazing Cut in smoky citrine by MakkyBrown
[April 04, 2020, 07:37:36 PM]


Faceter by Faceting Frank
[April 04, 2020, 02:35:02 PM]


Three Pro Faceters Interview by Sadosada
[April 02, 2020, 07:13:50 PM]


Does anyone have "Cleopatra's Eye" facet design? by roughcreations
[April 02, 2020, 04:48:57 PM]


Is this Septarian? Help please by Fullerton
[April 01, 2020, 09:14:31 PM]


Labradorite rough by FlashGP
[April 01, 2020, 12:05:12 AM]


Lortone power useage by bassplum
[March 31, 2020, 04:27:32 PM]


Buying a saw: comparison videos by Ghost
[March 31, 2020, 07:49:12 AM]


Fossils by Leabutterflies
[March 30, 2020, 12:09:13 PM]


Joke of the Day by pc bowe
[March 29, 2020, 07:51:47 AM]

* Calendar

April 2020
Sun Mon Tue Wed Thu Fri Sat
1 2 3 4
5 6 7 [8] 9 10 11
12 13 14 15 16 17 18
19 20 21 22 23 24 25
26 27 28 29 30

No calendar events were found.
Sorry! There are no calendar events available at the moment.

* Who's Online

  • Dot Guests: 32
  • Dot hidden: 0
  • Dot Users: 0

There aren't any users online.

* Find us on Facebook

* Forum Stats

  • stats Total Members: 4240
  • stats Total Posts: 55594
  • stats Total Topics: 5933
  • stats Total Categories: 6
  • stats Total Boards: 27
  • stats Most Online: 773