Show Posts

This section allows you to view all posts made by this member. Note that you can only see posts made in areas you currently have access to.

Topics - tinker

Pages: [1] 2 3 ... 6
Ask a "Silly" Question / Dopping Stones
« on: January 28, 2020, 05:40:29 PM »
Hi, has anybody had problems with dopping using sealing wax.  I have use wax on my dopping sticks for about 15 years, but over the last twelve months, I don't know whether it is the wax, but the stones seal to the stone, but once I start working on them they drop off the stick.   Can anybody suggest what I maybe doing wrong or has anybody got a suggestion on what other median and can use to attach the stone to the dop stick.

Ask a "Silly" Question / Moulding Gold
« on: June 23, 2019, 04:16:20 PM »
Hi Learned friends, I am attempting to pore molten gold into a mould to make a ring up have been unsuccessful.  I have attempted Cuttle fish moulds, clay mould and sand moulding with no success, can anybody give me some hints on how I can successfully produce a ring.  I have  previously had success with using Cuttle fish bone to mould stirling silver, but gold doesn't want to play the game. ???

Ask a "Silly" Question / Cuttle fish bone
« on: May 31, 2019, 10:55:33 AM »
Hi all, I am trying to buy some large cuttle fish bone for moulding silver and gold, would anybody know where I could purchase this  product, it would have to be about 1.5 to 2cm thick.

Ask a "Silly" Question / Metal Detectors
« on: April 27, 2019, 05:30:18 PM »
Hi guys, just wondering whether anybody can recommend an entry level metal detector, I have a son in law, that wants to get into serious gold detecting and was seeking my advise.   I told him it was too hard and he would be better off looking for gem stones,  any recommendations would be greatly appreciated.

Ask a "Silly" Question / Cooking Matrix Opal
« on: April 01, 2019, 11:41:09 AM »
Learned colleagues, I have recently came into some Matrix Opal from Winton in Queensland, It is the raw material and I have been told, to get the colours to come up in the stone.  You either have to burn it in sugar or in a light oil, is that correct, I was  previously told that you use sulphur acid and sugar.   Any advise would be much appreciated. beers

General Discussion / Canberra Rock Swap
« on: March 31, 2019, 10:33:14 AM »
Went to the Canberra Rock swap yesterday, very cold, but a very good turn up of sellers, largest lot I've seen in the 8 years I've been going.   Probably about 40 stalls, a lot of new dealers, especially with Boulder Opal and Winton matrix opal.  Norm Mandue you and your team did a great job and of course I spent too much money but the finished products will look great.

General Discussion / Lambert Industries Thailand
« on: February 17, 2019, 08:38:17 PM »
Fellow Rockhounds, does anybody know whether Lambert Industries is still operating, I have heard recently that they have been bought out by another company.  I fellow rock hound friend of mine sent some rough to be fascited back in August last year and has not received them back as yet.   Does anybody know if the info I was told is correct or not.

Cabbing and More / Problems with Polishing
« on: November 08, 2018, 09:46:39 AM »
Hi all,
      Just a silly question, I have been cabbing for the passed 15 years and oringinally used Silicone Carbide Wheels on my machine, which gave a great final product.   About 3 years ago I changed to diamond wheels and have found that they leave scratches on the final surface, I have used fine grit wheels to try and get the scratches out but to no avail.   I'm thinking of going back to the Silicone Carbide, but before I do can anybody suggest what I could be doing wrong. hotthirsty

Ask a "Silly" Question / Sodalite in Australia
« on: August 16, 2018, 09:51:42 PM »
Just wish to pick members brains, can anybody tell me if Sodalite is found in this country and where would the deposits be found.   Why I am asking this question is that a friend of mine has just come back from Emerald in Queensland and she has sent photo's to me of what looks like Sodalite, would this be possible.

Cheers Tinker beers

Ask a "Silly" Question / Removing mud from chrysophrase
« on: July 12, 2018, 06:29:58 PM »
Hi, I recently came into possession of a bucket of what looks like iron stone with veins of chrysophrase through it.  Most of the Iron Stone has decomposed and easily washed of with high pressure water, but I'm wanting some advise on what to remove the rest of the hard material off the chrysophrase with.  Thanks Tinker.

Ask a "Silly" Question / Looking for Amethyst Rough
« on: April 28, 2018, 04:20:13 PM »
Hi everyone, I am looking from amethyst rough, doesn't have to be of good quality, preferably a light mauve colour.   I have a mate that I have taught to cab rocks, he has only the use of one hand due to a tumour on the vertebrates on his neck.  He has done well for a man with his medical condition, he was asking me if I could get hold of some Amethyst,  I have tried serveral of my my suppliers but am unable to find any, can any assist me.  I have plenty of amethyst points, that I have found myself, but this is not what he wants.



Ask a "Silly" Question / Brass Taps
« on: October 30, 2017, 12:11:35 PM »
Hi all, I'm am trying to located some small brass taps for my cabbing machine, would anybody have any ideas where I could purchase them from. :)

Ask a "Silly" Question / Cutting Jade.
« on: October 24, 2017, 06:04:50 PM »
Hi all I was given a 3.5kg chunk of dark green Cowel Jade and attempted to cut it with my 14 inch Slabbing Saw but it caused the motor to smoke up, any suggestions on what type of blade to slab this with and  or is the a certain way you should cut this stuff.

Any help
Regards Tinker

Ask a "Silly" Question / Picture Gallery
« on: October 10, 2017, 09:01:37 PM »
Hi, all
    I have been having problems with downloading my pictures onto the Gallery, I have read the instruction placed on the forum, but it does not want to accept my photo's, any suggestions. ??? ??? ???

Ask a "Silly" Question / Australian Torquoise
« on: July 26, 2017, 03:37:05 PM »
Hi, does anybody have any suggestions where I can purchase some good quality Turquoise

Pages: [1] 2 3 ... 6

* Sponsor

HTML Online Editor Sample

ALF is hosted by Aussie Sapphire as a free service to the Lapidary community.

Visit our website here
Phone 1800 50 21 40
Or find us on Facebook

Recent Activities

Weld River by MALACHI
[Today at 03:48:04 PM]

Gemstones in Victoria by GraziePrego
[August 06, 2020, 03:20:02 PM]

Nundle and hanging rock trip by Kickingrocks
[July 31, 2020, 07:20:02 PM]

Concave Cutter by Giel
[July 31, 2020, 03:53:37 AM]

Topaz by Navneetgems
[July 30, 2020, 09:53:59 PM]

Please I need help deciding on a rock tumbler ✌ by MakkyBrown
[July 30, 2020, 09:47:18 PM]

Amethyst by Navneetgems
[July 27, 2020, 08:21:56 PM]

Hall Xtra faceting machine speed controller. by rusty46
[July 27, 2020, 11:00:49 AM]

"breaking in" new 1200/3000 grit topper laps by Giel
[July 24, 2020, 03:19:33 AM]

Gemstone Questions by Navneetgems
[July 22, 2020, 10:48:08 PM]

Emerald Cuts, any tips? by Navneetgems
[July 20, 2020, 10:20:02 PM]

Gerald Wykoff CJP ebooks and CD collection wanted by FireFlyer
[July 18, 2020, 03:13:30 AM]

* Calendar

August 2020
Sun Mon Tue Wed Thu Fri Sat
2 3 4 5 6 7 [8]
9 10 11 12 13 14 15
16 17 18 19 20 21 22
23 24 25 26 27 28 29
30 31

No calendar events were found.
Sorry! There are no calendar events available at the moment.

* Who's Online

  • Dot Guests: 52
  • Dot hidden: 0
  • Dot Users: 0

There aren't any users online.

* Find us on Facebook

* Forum Stats

  • stats Total Members: 4352
  • stats Total Posts: 56154
  • stats Total Topics: 5983
  • stats Total Categories: 6
  • stats Total Boards: 27
  • stats Most Online: 773