Aussie Lapidary Forum

LAPIDARY => Saws and Diamond Blades => Topic started by: Lazychops on July 19, 2017, 06:58:22 PM

Title: Need help cutting thundereggs
Post by: Lazychops on July 19, 2017, 06:58:22 PM
I recently got a heap  of thundereggs from an old collection and also recently got nerve damage in my arm, i was wondering if anyone could help cut them in trade for some. I have heaps and heaps. Brisbane/ gold coast area
Title: Re: Need help cutting thundereggs
Post by: Ghost on July 19, 2017, 08:08:45 PM
Check out your local lapidary clubs.   Many of them have club saws for members to use.   If not, a club member may be able to help you.


Welcome to ALF Lazychops.   I am sure you will have lots of fun and satisfaction in this hobby.

Regards,   Ghost

Title: Re: Need help cutting thundereggs
Post by: Lazychops on July 19, 2017, 09:14:02 PM
I already looked into a few local clubs but im unable physically to do the cutting, so i dont really thunk joining would help me
Title: Re: Need help cutting thundereggs
Post by: Crocket on July 19, 2017, 09:45:15 PM
Welcome to the forum Lazychops,
Sorry I can't help you with the cutting at the moment. If you don't find anyone I can probably help with some later in the year after I make my move north to the warmer climate.  I likely won't be set up until around the end of October but feel free to contact me after that if you are still looking.  :)

Just a thought... you can visit your local club/s when they are open and talk with the members.  You just might find someone interested.

Good luck... and enjoy.
 ;D
Title: Re: Need help cutting thundereggs
Post by: Lazychops on July 19, 2017, 11:24:58 PM
Thanks guys, and cheers for the welcome.
Title: Re: Need help cutting thundereggs
Post by: Gemster on July 20, 2017, 10:53:12 AM
Mr Crocket, Are you moving North :D.... Hope you have your Passport... We don't just let Anyone in you know.. ;) 
  Lazychops, Welcome to the Forum, I have a saw here but it will only cut 30mm... Not deep enough for Thundereggs.

I will ask on the weekend when I see a mate with a bigger saw and see what he can do ...

 Gemster...
Title: Re: Need help cutting thundereggs
Post by: Shivan on July 20, 2017, 01:52:28 PM
I would help out, but am a bit far south.

It may be worth asking your local club if someone would be willing to cut a few for you, especially if you don't mind mind trading a half or two for their effort.
One thing to keep in mind though, there can be costs associated with using the saws at clubs. I think ours is like 20c per square inch.
Title: Re: Need help cutting thundereggs
Post by: Crocket on July 20, 2017, 06:17:01 PM
Mr Crocket, Are you moving North :D.... Hope you have your Passport... We don't just let Anyone in you know.. ;)

I certainly hope to be Gemster... if all goes well I will be in the greater Hervey Bay area and this will be my new shed!  A bit more room than I have at the moment.

(http://aussielapidaryforum.com/forum/gallery/8/medium_33979-200717181327.jpeg) (http://aussielapidaryforum.com/forum/index.php?action=gallery;sa=view;id=8636)
Title: Re: Need help cutting thundereggs
Post by: FlashGP on July 20, 2017, 06:26:26 PM
Hi Lazychops.

I'm a member of Waterloo Bay Lapidary Club.  We are a small club meeting at Hemmant near the port of Brisbane.

Len our President watches over "his" saws like a hawk.   ;)  Not really true.  He makes sure members know what they are doing before letting them loose. 

More often than not he is actively involved in setting up and monitoring the big saw.  If you pop down on a Monday night between 7 and 8 pm  we can have a chat about what we can do. 

I am not sure if you need to join or if the club can reach another arrangement.

Our Gemshow is on the last Saturday in August if you don't drop in before hand you could have a chat at the Show.

One of our members, Bruno, sells slab.  He'll be at the show so you could strike up a conversation and see if he would be interested.  I don't  know, but no harm in asking.

Pm me for address details.

Yours sincerely
Flash
Title: Re: Need help cutting thundereggs
Post by: FlashGP on July 20, 2017, 06:28:41 PM
Gemster

Are you retiring to the bay?  I was there as a kid in the 1970s.  WAS good fishing there then.

Looks like you will have ample room for a boat for deep sea fossicking /pearl diving (plenty of oysters on the Woodies and Picnic Islands) :) and your lapidary gear.
Title: Re: Need help cutting thundereggs
Post by: Gemster on July 21, 2017, 01:44:27 PM
 :( Nah not me moving... Mr Crocket is tho :D  And, He is moving to a very nice part of QLD, I might add...    With a very Large 'Man Cave'....  ;D 

  Gemster...
Title: Re: Need help cutting thundereggs
Post by: tinker on July 21, 2017, 02:13:13 PM
Wow Crocket are you going into competition to Aussie Sapphire ;D  good luck on your move.
Title: Re: Need help cutting thundereggs
Post by: Aussie Sapphire on July 21, 2017, 02:45:39 PM
Wow Crocket are you going into competition to Aussie Sapphire ;D  good luck on your move.

Every bloke needs a shed and the bigger the better !!   8)
  beers


Cheers Leah


Title: Re: Need help cutting thundereggs
Post by: Orange Pirate on July 21, 2017, 11:00:45 PM
Wow Crocket are you going into competition to Aussie Sapphire ;D  good luck on your move.

Every bloke needs a shed and the bigger the better !!   8)
  beers


Cheers Leah


Very understanding Leah. By the way my wife's number is 04325XXXXX.  :D ;D
Title: Re: Need help cutting thundereggs
Post by: mehoose on July 22, 2017, 02:40:25 AM
Very understanding Leah. By the way my wife's number is 04325XXXXX.  :D ;D
Ahahhaa.. love it!
Title: Re: Need help cutting thundereggs
Post by: FlashGP on July 23, 2017, 09:24:19 AM
Wow Crocket are you going into competition to Aussie Sapphire ;D  good luck on your move.

Every bloke needs a shed and the bigger the better !!   8)
  beers


Cheers Leah


Very understanding Leah. By the way my wife's number is 04325XXXXX.  :D ;D

My wife calls it a "She Shed",  she would like one, with plenty of windows, air conditioning and two dog beds.

I couldn't fit one in my backyard, so we make do with our renovated garage.
Title: Re: Need help cutting thundereggs
Post by: Thundereggfazination on September 22, 2017, 06:55:59 AM
Hi Lazychops,

do you know where the thundereggs wher from?

Do you like to trade or sell some of them?

Best regards
Title: Re: Need help cutting thundereggs
Post by: Mouse on September 30, 2017, 10:02:26 AM
Hi Lazychops, A belated welcome from me to the forum. Did you have any success getting your eggs sliced and diced? If not PM me with some details. I might be able to help.

Regards

Mouse
SimplePortal 2.3.7 © 2008-2024, SimplePortal