collapse

Author Topic: carved opal from lighning ridge  (Read 5371 times)

Giel

  • ALF'er Silver Member
  • *
  • Posts: 99
carved opal from lighning ridge
« on: November 02, 2019, 11:55:53 PM »
I bought this piece a long time ago as "gamble rough"  and I finally finished carving and polishing it.
It's very hard get a good photo of the colors, but it turned out pretty good.
Someone already asked me about the price, but I really have no clue what a piece like this should sell for!

Its a whopping 194,5 carat piece from lightning ridge. It's 60mm by 40 mm.
I carved it to show as much of the different colors as possible.
On the top there is a large patch of very bright green-gold that is just one big flash, also a small patch of very bright light blue-green, and a patch of very bright multicolor. The rest of the stone is mostly green and blue color with some potch running in between.
First two pictures are the front of the stone, last one is the back. Hope you like it!







colza

  • ALF'er Gold Member
  • *
  • Posts: 183
  • My fossicking mate
Re: carved opal from lighning ridge
« Reply #1 on: November 03, 2019, 06:37:49 AM »
It's beautiful Giel. Nothing quite like opal, its powerful colouring.
Cheers,
colza
I dig it.

sapphireminer

  • ALF'er Silver Member
  • *
  • Posts: 37
Re: carved opal from lighning ridge
« Reply #2 on: November 03, 2019, 01:43:06 PM »
Hi Giel you have done a great deal of work on the stone it looks good well done. Dave

Lap2020

  • Newbie
  • *
  • Posts: 4
Re: carved opal from lighning ridge
« Reply #3 on: November 11, 2019, 11:33:52 PM »
Hi Giel

Beautiful job with the carving and polishing.

I like the back of the stone more than the front of the stone.

Andrew

Giel

  • ALF'er Silver Member
  • *
  • Posts: 99
Re: carved opal from lighning ridge
« Reply #4 on: November 15, 2019, 07:32:59 PM »
Thanx for the compliments!

harryopal

  • ALF'er Gold Member
  • *
  • Posts: 236
Re: carved opal from lighning ridge
« Reply #5 on: November 22, 2019, 04:24:57 PM »
 A lovely piece. I carved a tiny piece about 3/4" high that has a robed scholar sitting on a stool and reading a book with a monkey peering over the shoulder. It turned out much better than I had expected and I am just sorry I didn't use better quality opal with some decent colour.
Could you describe the polishing methods used in the grooves and how you set about it, please?
By the way, does orientation of the stone effect the display or is it pretty good from any direction?
My inclination would be to set it as a pendant using gold.



harryopal

Giel

  • ALF'er Silver Member
  • *
  • Posts: 99
Re: carved opal from lighning ridge
« Reply #6 on: November 22, 2019, 07:21:30 PM »
For polishing the grooves I used a handpiece with small felt head/mandrel. (dont know how you call them in english)
I used a round felt piece and a cylindrical felt piece. the cylindrical felt piece has a sharp edge that you can use for tiny grooves.
Polished with faceting cerium. (french cerium?)

harryopal

  • ALF'er Gold Member
  • *
  • Posts: 236
Re: carved opal from lighning ridge
« Reply #7 on: November 23, 2019, 04:16:36 PM »
Thanks for the response. Any particular reason you did not use diamond spray?


And the other question was :


By the way, does orientation of the stone effect the display or is it pretty good from any direction?
harryopal

Giel

  • ALF'er Silver Member
  • *
  • Posts: 99
Re: carved opal from lighning ridge
« Reply #8 on: November 23, 2019, 08:26:34 PM »
I have never used diamond spray on opal, I think it is to aggressive.
Cerium oxide works very well on opal.
For opal I think felt with cerium is the way to go, you could even try felt with 1200 carborundum powder for prepolish, but I have never tried it myself.
For prepolishing I used some old 1200 flexible disc that I cut up into small rounds and glued them on a small shank for a micromotor handpiece.

Quote
By the way, does orientation of the stone effect the display or is it pretty good from any direction?

In this stone the colors are pretty good from any direction, but that depends entirely on the piece of opal, every piece is different!
I could have cut it into pieces for individual stones, but I thought that was a waste. So I cut this one as a "collecters item" as it displays a lot of different colors and patterns.
« Last Edit: November 23, 2019, 08:30:34 PM by Giel »

Tags:
 

Recent Activities

Joke of the Day by pc bowe
[Today at 08:50:12 AM]


Advice on Lamberts and other overseas cutters by Aussie Sapphire
[October 22, 2021, 07:21:02 AM]


Making your own concave cutter mandrels by Faceting Frank
[October 21, 2021, 02:56:08 PM]


Flinders Island, TAS - Hunting for Killiecrankie Diamonds by MrSydney
[October 18, 2021, 12:18:19 PM]


what is the leveling system on the forum by pc bowe
[October 11, 2021, 01:06:38 PM]


I have a recommendation for the forum by The Aussie Boy
[October 10, 2021, 11:46:59 AM]


High bankers by The Aussie Boy
[October 10, 2021, 11:45:47 AM]


Tuena by The Aussie Boy
[October 10, 2021, 11:43:04 AM]


What does jaeper look like by geowork
[October 07, 2021, 01:31:50 PM]


Caves beach rocks that have been found or could be founds by MrSydney
[October 04, 2021, 12:06:06 PM]


Dopping with epoxy by geowork
[September 25, 2021, 08:22:56 PM]


Cooking Matrix Opal by Barry Simiana
[September 25, 2021, 11:47:34 AM]


Facetron Encoder Mod Thread by RoughCreations
[September 23, 2021, 11:14:30 AM]


Gems stolen, Mt Surprise by starsapphire78
[September 14, 2021, 09:07:23 PM]


Back after long layoff by Bucket
[September 14, 2021, 03:27:15 PM]