collapse

Author Topic: Bert Smit faceting machinery  (Read 5269 times)

RoughCreations

  • Administrator
  • ALF'er Gold Member
  • *****
  • Posts: 208
    • Rough Creations homepage
Bert Smit faceting machinery
« on: July 23, 2021, 10:30:07 AM »
The following are shots of Bert Smit's faceting machine and related equipment that he manufactures in the Netherlands. I have bought several of Bert's ebonite disks in the past (https://aussielapidaryforum.com/forum/index.php?topic=6707.0) there are some of his disks visible in the pictures below. I first heard about Bert's gear from Giel, another forum member, based in the Netherlands. I found it interesting that Bert makes these faceting machines in batches of ~ 15, so it is not a one-off personal machine.

He is a very careful craftsman as evidenced by his superb disks. He makes, amongst other things, dops, transfer blocks for various diameter and style dops, disks and pre-former attachments. He is going to send me some pictures of his other gadgets.

For those of you, like myself, that like to see how others design their machinery, see below. If anyone is interested in how to obtain any of it, PM me and I can supply you with more info.

I don't quite get all of the subtleties of Bert's machine, from the pictures - how would you raise and lower the depth of cut, and how would you cheat? Is that a drill chuck hiding in there?
Feel free to add your comments or thoughts. Bert doesn't speak English I believe, but is active on a European forum I think.
RC

Faceting machine


Faceting machine and transfer blocks top view


Faceting machine close up


Preformer on mast


Preformer


Preformer templates


Transfer block


Transfer block model 2





Rough Creations - Beauty from rough beginnings

Faceting Frank

  • Global Moderator
  • ALF'er Platinum
  • *****
  • Posts: 348
Re: Bert Smit faceting machinery
« Reply #1 on: July 24, 2021, 10:47:52 AM »
Very interesting looking machine and looks quit complex. I can see an index wheel at the back of the quill and it looks as though it is cheated somehow with the drill chuck. I can see the performer (two pictures just above the preforms) has its own base and mast, so it’s totally independent of the faceting head. There’s a pin sticking out just above the bottom wing nut on the post that must be used for fine adjustment. But I don’t see how its going to have much of a distance in movement.
 Looking at the slot the faceting head shaft fits into, it must lift out. Is that to lift out and inspect the facet being cut or some other purpose?

RoughCreations

  • Administrator
  • ALF'er Gold Member
  • *****
  • Posts: 208
    • Rough Creations homepage
Re: Bert Smit faceting machinery
« Reply #2 on: July 24, 2021, 02:08:35 PM »
Looking at the slot the faceting head shaft fits into, it must lift out. Is that to lift out and inspect the facet being cut or some other purpose?

There appears to be a little silver grub screw holding the bearing in, but it looks like it would be quick to remove the quill if required. Not sure why he's done it this way, but I will ask him. The brass index wheel looks a bit like the ones from the Chinese machines you see around.
Rough Creations - Beauty from rough beginnings

RoughCreations

  • Administrator
  • ALF'er Gold Member
  • *****
  • Posts: 208
    • Rough Creations homepage
Bert Smit (Forum Donater) faceting machinery: Index Gears
« Reply #3 on: October 12, 2022, 08:09:16 PM »
I recently received an 80 Index gear for my Facetron machine made by forum member Bert, located in the Netherlands.

The gear fits my Facetron machine very well, I am very happy with the craftsmanship, as usual. The gear is constructed of very hard 7075 Aluminium alloy.
I believe Bert can make other Indexes, and possibly for other machines as well, contact him through the ALF Personal Messaging system for all queries, or contact me if you have problems locating him, his member link is Bert: https://aussielapidaryforum.com/forum/index.php?action=emailuser;sa=email;uid=167828

You may remember (as discussed in another thread a few months back) I tried to locate the genuine Facetron Index gear part from the USA to no avail. (https://aussielapidaryforum.com/forum/index.php?topic=6963.0)

Bert generously asked that I donate the price of the Index gear (30 Euro plus 19 Euro postage) to ALF, which I did a moment ago using the "Donate" button on the forum Main Page, rather than pay him for it.

Remember also that Bert makes all sorts of faceting accessories including complete machines (see earlier in this thread).

Some pictures:







« Last Edit: October 12, 2022, 08:22:03 PM by RoughCreations »
Rough Creations - Beauty from rough beginnings

Bucket

  • Global Moderator
  • ALF'er VIP
  • *****
  • Posts: 1063
Re: Bert Smit faceting machinery
« Reply #4 on: October 13, 2022, 05:00:34 PM »
It looks the goods RC, you'll have to let us know how it goes. A big thanks to Bert for offering to make these, Jarvi are impossible to get at the moment although I believe there is someone going to continue with manufacturing spare parts.
Common sense isn't exactly common

 

Recent Activities

Recently cut frosted design by AB Facet Designs by Rusted
[Today at 05:33:53 PM]


What do you think this is? by Ghost
[November 16, 2022, 08:08:45 PM]


6mm dops for Imahashi by FlashGP
[November 09, 2022, 08:40:19 AM]


Joke of the Day by pc bowe
[November 04, 2022, 05:08:12 PM]


Any experienced tumblers around Central Coast NSW by As I in does tries!
[November 04, 2022, 11:47:53 AM]


Opals, Burrs and rotary tools by wallie
[October 29, 2022, 02:47:27 PM]


Hi from new member 👋🏼 by MrSydney
[October 28, 2022, 09:52:41 AM]


Bert Smit faceting machinery by Bucket
[October 13, 2022, 05:00:34 PM]


Places to find radioactive rocks? by Plutonium
[September 28, 2022, 07:27:58 PM]


Rocky creek Rd by mindfulmoments
[September 27, 2022, 05:02:37 PM]


Weekend Trip to Port Macquarie by laanguy
[September 25, 2022, 08:56:05 PM]


Bendigo and Surrounds Gemstone location's by HarknessHunter
[September 25, 2022, 11:04:56 AM]


Jellybean Junction - Stannifer - great to contact if going to the area by Wendy Purdie
[September 21, 2022, 10:25:08 AM]


Perth Gem shows Oct 2022. by chookie2
[September 21, 2022, 12:26:04 AM]


Naturally speaking, Opal, 'To potch or not to potch' by dom105
[September 16, 2022, 08:04:01 AM]

SimplePortal 2.3.7 © 2008-2022, SimplePortal